DrawersThe Allure line includes a 3/4” thick solid plywood dovetail drawer box with a 3/8” plywood bottom. attached to Tandem plus Blumotion full extension concealed drawer runners.
Shelving18mm (3/4”) thick veneer plywood with matching wood veneer edge banding is used on all wall and base cabinetry where applicable. The adjustable shelves are supported by a nickel-plated shelf clip. All base cabinetry includes an 18” deep adjustable shelf.
Backs, tops and bottoms1/2” thick veneered plywood with natural finished interiors, dovetailed side panels engineering to create a solid integrated cabinet box. Backs are glued, stapled and screwed into place for additional support.
Face frame3/4” x 1 1/2” solid wood stiles and rails jointed with glue and dowels. Back of face frames are dovetail grooved to accept side panels. The face frame is engineered so that the bottom of all base and wall cabinets are flushed with the top inside edge of the face frame creating a custom look.
Toe kick3/4” x 4 1/2: solid plywood toe kick is added to each assembled cabinet and finished to match along with the edges. Additional 8 foot lengths of 1/4” plywood toe kicks are available for those who do not wish to see the joints between cabinets.
Corner blocks and panel beamsAll four corners of the base cabinets are secured with a wooden block screwed into each end panel at a 45º angle for the support and mounting of a countertop. In addition a panel beam is fastened into a dovetail groove at the top of each base cabinet to ensure a straight fully integrated side.